Products - Man Overboard System

 

Man Overboard System

Seismic Stuff manufactures a complete Man Overboard System which controls the complete alarm system shipwide interfacing to sounders, indicator lights as well as providing an interlock connection for use with the gun controller.

The system features a single central controller which is based around twin redundant 24V power supplies. Configuration is simple with all remote wiring coming into screw terminals on the main PCB. Operation is based around intuitive icon based labels on pushbuttons and indicators.

Remote switches are emergency stop type with twist to release action. Once triggered the system cannot be reset by releasing the emergency stop, but only from the central controller. Once activated Xenon flashers and remote horns sound the alarm shipwide, in addition the gun controller is deactivated via the interlock connection.

The Sounders can be silenced from the main controller while the visual indicators are active and gun controller inhibited. This would typically be the case after the response team have been alerted but the incident is still in progress. When the incident is over the system can be completely reset.







Ordering Information:


  • 14-01-0001 MOB System Configuration A

Contains Bridge Controller, Remote Instrument Room Panel, 9 x Remote MOB Buttons, 5 x Remote Horns & 5 x Remote Xenon Flashers.

  • 14-02-0001 Instrument Room MOB Alarm Panel x 1
  • 14-02-0002 Bridge Room MOB Alarm Panel x 1
  • 14-02-0003 IP65 Lock Reset Pushbuttons with gland x 9
  • 14-02-0004 24VDC MOB Horn x 5
  • 14-02-0005 24VDC Xenon Flash Light (Blue) x 5
  • 14-02-0006 Junction Box Enclosure 220x120x90 x 3
  • 14-02-0007 Cable Gland, IP68, M16 5-9mm x 30
  • 14-02-0008 Lambda 4.3A 24V PSU x 2
  • 14-02-0009 Bridge Instrumentation Box 300x240x100 x 1
  • 14-02-0010 MOB System PCB x 1
  • 14-02-0011 MOB System PCB (Spare) x 1

  • 14-01-0002 MOB System Configuration B

Contains Bridge Controller, Remote Instrument Room Panel, 9 x Flap Covered Remote MOB Buttons, 7 x Remote Horns & 5 x Remote Xenon Flashers as well as a junction box PCB to allow 'multiplexed' wiring to the bridge controller.

  • 14-02-0001 Instrument Room MOB Alarm Panel x 1
  • 14-02-0002 Bridge Room MOB Alarm Panel x 1
  • 14-02-0012 Flap Covered Push Buttons with glands x 9
  • 14-02-0004 24VDC MOB Horn x 7
  • 14-02-0005 24VDC Xenon Flash Light (Blue) x 5
  • 14-02-0006 Junction Box Enclosure 220x120x90 x 1
  • 14-02-0007 Cable Gland, IP68, M16 5-9mm x 30
  • 14-02-0008 Lambda 4.3A 24V PSU x 2
  • 14-02-0009 Bridge Instrumentation Box 300x240x100 x 1
  • 14-02-0010 MOB System PCB x 1
  • 14-02-0011 MOB System PCB (Spare) x 1
  • 14-02-0013 MOB System Junction Box PCB x 1

To request a quotation, assistance in system design or different configurations than the above, please contact Seismic Stuff...



info@seismicstuff.com
Tel: +65 65420411 Fax: +65 65425411 Disclaimer © 2004-2017 Seismic Stuff